Transforming Technologies CM310 Spartan Two Continuous Monitor (1 Operator & 1 Work Surface)
Pay with a Purchase Order
As part of our payment options, we gladly accept purchase orders. However, it is important to note that setting up terms with Starboard Technologies is necessary. To request the required information, please email us at rubin@starboardtech.com or make use of our user-friendly online submission form.
- Ensure ESD Protection: Ensure your ESD workstation is static-safe by continuously checking one single Wire Wrist Strap & One Work Surface
- Compatibility: Compatible with most standard single wire wrist straps
- Alarms: Audible and visual alarms indicate a ground failure
- Ease of Use: Simply plug in a wrist strap to begin monitoring
- Factory Calibrated: It is a fixed resistor system and no adjustments needed
Ensure Your ESD Workstation is Static-Safe with a the CM310 Spartan Two Single Wire Constant Monitor
The Spartan Series Constant monitors provide ongoing testing of single wire wrist straps and ESD worksurfaces. The CM310 not only eliminates time consuming wrist strap testing, it removes the danger of wrist straps failing in the field and possibly exposing highly sensitive materials to static. Both audible and visual alarms signal when the wrist straps or worksurface ground fail. Enclosed in a durable metal case with built in mounting brackets, the monitors can be installed underneath table tops to save work space. The Spartan series monitors meet or exceed the recommendations of ANSI ESD S20.20.
Why Use Constant Monitors
The first and best line of defense against static damage is wrist strap grounding, but these wrist straps wear over time and must be tested to ensure they are working properly. ESD Constant monitors reduce production costs by eliminating the time spent on testing wrist straps before each shift. Further savings may be realized by reduced ESD damage from broken wrist straps.
Capacitance Technology
The CM310 sends out a signal through the wrist strap that detects the capacitance of the person and ground. When both are present, the monitor goes into an unalarmed state. If the electrical connection to the person or to ground should fail, the circuit will go into the alarm state to signal there is a problem.
Calibration
The CM310 constant monitors are factory calibrated and will never need recalibration. It is a fixed resistor system and is go no go, there is no calibration needed.
Additional information
- Weight: 1 lbs
- Dimensions: 1.25" x 0.88" x 1.75"
- Type: Single Wire/Capacitance
- Capabilties: Monitors 1 Wrist Strap & 1 Worksurface
- Voltage: 120V AC