Mountz HDC40i Hybrid Torque Controller
Text block
SKU 145740
by Mountz
Original price
$4,950.00
-
Original price
$4,950.00
Original price
$4,950.00
$5,200.00
$5,200.00
-
$5,200.00
Current price
$5,200.00
Pay with a Purchase Order
As part of our payment options, we gladly accept purchase orders. However, it is important to note that setting up terms with Starboard Technologies is necessary. To request the required information, please email us at rubin@starboardtech.com or make use of our user-friendly online submission form.
Specs
Model:
HDC40i
Item #:
145740
Tool Weight:
4.6 lbs.
Tool Length:
8.75
Tool Width:
3.75
Tool Height:
5
Output VDC:
DC40V, 3A
Input VAC:
AC120VC ~ 220V, 50–60Hz
Fuse Size:
AC250V 10A
The HDC40i controller operates with only the HD150, HD220 & HD450 electric screwdrivers. It is a single tool controller that offers programmable speed, angle, auto reverse and soft start options. I/O interface for communication with external devices such as PLC. The controller provides programmable fastening options for sequence based assembly automation applications, along with a built-in screw counter.
- Programmable digital torque setting with memory for 8 preset torque settings.
- Real-time monitoring and torque control of the tightening process.
- Selectable speed up to 1,800 rpm.
- Programming and monitoring with PC software.
- Programmable multi-sequence operation.
- Built-in Screw Counter (0 to 99 screws)
- Detection of fastening error and displays error condition.
- Visual assembly fastener count (count up or down), including total count.
- Real time monitoring by PC program.
- Detects - cross threading, omissions, unfinished rundowns and cycle complete.
- Three selectable units of measure: lbf.in, N.m, Kgf.cm.
- Selectable settings for Torque, Speed, Min & Max Angle, and Soft Start time.
- Maximum angle control and verification
- Minimum angle control and error reporting
- 25P I/O interface to a PLC or 8 direct sensor ports.
- Input / Output for PLC.
- Output Signal Types: Count complete, Torque up and Count complete Alarm & Screw Missing
- Angle Control: 0.1 - 10 turns
- Preset Parameters: Torque, Speed, Soft Start & Angle in 8 preset numbers
- Auto detection of the connected driver: Auto detection of the offset value from the EEProm on the driver
- Error display: Error display by code no. in system, communication & pattern error group
- Fastening Quality Control: OK/NG monitoring of screw fastening by preset pattern of angle and/or time.
- PC based program for parameter settings, monitoring and real time output
- Input (Air Pressure): Min 5 Bar (72.5 PSI) / Max 6.5 Bar (92.2 PSI)
Operates with these electric screwdriver models: HD150, HD220 & HD450