Skip to content
THE INTERNET'S BEST SOURCE FOR ELECTRONIC REPAIR AND ASSEMBLY TOOLS & SUPPLIES
BEST SOURCE FOR ELECTRONIC REPAIR AND ASSEMBLY TOOLS & SUPPLIES

Now Accepting Purchase Orders as a form of Payment - Apply Today

Now Accepting Purchase Orders as a form of Payment - Apply Today

Mountz HDC35i Hybrid Torque Controller

Mountz HDC35i Hybrid Torque Controller

MPN: HDC35i

Unlock additional discounts!

  • Input the coupon code SAVE5MORE at checkout for an extra 5% off this product.

SKU 145820
by Mountz
Save $148.50 Save $148.50
$4,950.00
$4,950.00 - $4,950.00
$4,950.00
$4,801.50
$4,801.50 - $4,801.50
$4,801.50
Request a quote

Specs

Model:
HDC35i
Item #:
145820
Tool Weight:
5.7 lbs.
Tool Length:
9
Tool Width:
4.125
Tool Height:
5.66
Output VDC:
DC35V, 4A
Input VAC:
AC120VC ~ 220V, 50–60Hz
The HDC35i controller operates with only the PHD35N, PHD50N, PHD100N & HD100N electric screwdrivers. It is a single tool controller that offers programmable speed, angle, auto reverse  and soft start options. I/O interface for communication with external devices such as PLC. The controller provides programmable fastening options for sequence based assembly automation applications, along with a built-in screw counter. 

    • Programmable digital torque setting with memory for 8 preset torque settings.
    • Real-time monitoring and torque control of the tightening process.
    • Selectable speed up to 1,800 rpm.
    • Programming and monitoring with PC software.
    • Programmable multi-sequence operation.
    • Built-in Screw Counter (0 to 99 screws)
    • Detection of fastening error and displays error condition.
    • Visual assembly fastener count (count up or down), including total count.
    • Real time monitoring by PC program.
    • Detects - cross threading, omissions, unfinished rundowns and cycle complete.
    • Three selectable units of measure: lbf.in, N.m, Kgf.cm.
    • Selectable settings for Torque, Speed, Min & Max Angle, and Soft Start time.
    • Maximum angle control and verification
    • Minimum angle control and error reporting
    • 25P I/O interface to a PLC or 8 direct sensor ports.
    • Input / Output for PLC.
    • Output Signal Types: Count complete, Torque up and Count complete Alarm & Screw Missing
    • Angle Control: 0.1 - 10 turns
    • Preset Parameters: Torque, Speed, Soft Start & Angle in 8 preset numbers
    • Auto detection of the connected driver: Auto detection of the offset value from the EEProm on the driver
    • Error display: Error display by code no. in system, communication & pattern error group
    • Fastening Quality Control: OK/NG monitoring of screw fastening by preset pattern of angle and/or time.
    • PC based program for parameter settings, monitoring and real time output
    • Input (Air Pressure): Min 5 Bar (72.5 PSI) / Max 6.5 Bar (92.2 PSI)
Operates with these electric screwdriver models: PHD35N, PHD50N, PHD100N & HD100N

If you have a questions, call us at 321.676.3711 or

Contact information

Sales assistance concerning a product or solution for you or your business:

Starboard Technology

115 E. New Haven Avenue, Melbourne, FL 32901 Phone: (321) 676-3711 /Fax: (321) 676-3171

On Site Search

Still looking - try our awesome search tool or contact us at 321.676.3711