90 Degree Bent Nose Plier (Qty of 5)
Pay with a Purchase Order
As part of our payment options, we gladly accept purchase orders. However, it is important to note that setting up terms with Starboard Technologies is necessary. To request the required information, please email us at rubin@starboardtech.com or make use of our user-friendly online submission form.
| Part Number | 486 | |
| Air Pressure | 2 kg/cm² (4.4 lbs.) - 7 kg/cm² (22 lbs.) | |
| Dimensions (W x H x D) | 486 (Air Unit) | 150 x 100 x 300 mm (5.9 x 3.9 x 11.8 in.) |
| Weight (w/o Solder) | 486 (Air Unit) | 3.5 kg. (7.7 lbs.) |
NOTE: 486 Air Unit/Blower is ONLY intended for use with the Hakko 485.
| CONTENTS | |
| Description | |
| 485-28 | 14/16 pin air hood |
| 485-29 | 18/20 pin air hood |
| 485-21 | 28 pin air hood |
| 485-31 | 42 pin air hood |
Air Hood holder with hose (attached to 486) | |
After reflowing the soldered connection(s) with the 485 soldering system and the component has been removed from the board, residual solder remains in the barrel of the through-hole board. The 486 removes the residual solder from the board with an air hood, which is attached to the 486 via an air hose.
To use the 486, after the component has been removed from the board, place the appropriate air hood/nozzle over the component area and activate the 486 air unit with the 485 unit's footswitch. The (adjustable) air pressure will remove the solder from the through-hole barrels under the air hood.
Part Number: 486